6 Easy Fixes for Wahl Clippers That Are Not Cutting Properly
Table of Contents:
- Introduction
- Why Wall Clippers Are Not Cutting Properly
- The Importance of Maintaining Wall Clippers
- Easy Fixes for Wall Clippers That Are Not Cutting Properly
4.1. Step 1: Oil the Blades
4.2. Step 2: Clean Out the Hair
4.3. Step 3: Adjust the Blades
4.4. Step 4: Adjust the Taper Lever
4.5. Step 5: Let it Cool Down
4.6. Step 6: Let the Hair Dry
- Conclusion
- FAQs
Easy Fixes for Wall Clippers That Are Not Cutting Properly
Wall clippers are a convenient tool for maintaining your hair, but sometimes they don't perform as expected. If you're facing the frustrating issue of wall clippers not cutting properly, don't worry. In this article, we will walk you through six easy fixes that will likely solve the problem and get your wall clippers back to their efficient cutting state.
Step 1: Oil the Blades
Proper lubrication is crucial for the smooth functioning of wall clippers. Before every use, it is recommended to oil the blades. Just a few drops of blade oil spread throughout the blades can make a significant difference. Turn on the clippers and move the taper in and out and up and down to distribute the oil evenly. This simple step can greatly improve the cutting performance of your wall clippers.
Step 2: Clean Out the Hair
Hair build-up can impact the cutting power and effectiveness of wall clippers. If blowing the old hair out is not enough, you need to take further action. Remove the screws and detach the blades to thoroughly clean out the hair that's trapped. By doing so, you ensure that there are no obstacles hindering the proper functioning of the clippers.
Step 3: Adjust the Blades
Sometimes, the blades of wall clippers may be misaligned, affecting their cutting ability. Use the screws to adjust the position of the blades. It is essential to create a small gap between the front stationary blades and the rear moving ones. The moving blades should be slightly recessed beneath the stationary blades. By achieving the right balance, you allow the clippers to cut better while maintaining a desired closeness.
Step 4: Adjust the Taper Lever
If the clippers are not cutting properly, adjusting the taper lever might help. Pulling the taper lever back creates a larger gap, while pushing it forward reduces the gap. Experiment with different positions to find the sweet spot that improves the cutting performance of your wall clippers. Finding the right gap can make a significant difference in the quality of the cut.
Step 5: Let it Cool Down
Overheating can affect the performance of wall clippers. If you've been using them for an extended period or for intensive grooming, they may overheat. In such cases, it is essential to let them cool down. Turn off the clippers and wait for about 10 minutes before attempting to use them again. Cooling down allows the clippers to function optimally, ensuring a better cutting experience.
Step 6: Let the Hair Dry
Cutting wet hair with wall clippers is possible but often leads to subpar results. If your hair is excessively wet, it tends to clump together, making it difficult for the clippers to cut smoothly. It is recommended to let the hair dry before attempting to cut it. By waiting until the hair is dry, you ensure a more effective cut, resulting in a clean and even hairstyle.
In conclusion, if you're facing the issue of wall clippers not cutting properly, these six easy fixes can help you restore their efficiency. Remember to oil the blades, clean out the hair, adjust the blades and taper lever, let it cool down, and cut hair when it's dry. By following these steps, you can maximize the performance of your wall clippers and achieve the desired results.
FAQs:
Q: How often should I oil the blades of my wall clippers?
A: It is recommended to oil the blades before every use to ensure smooth functioning.
Q: Can I use any type of oil to lubricate my wall clippers?
A: It is best to use blade oil specifically designed for clippers to ensure optimal performance and longevity.
Q: How frequently should I clean out the hair from my wall clippers?
A: Regular maintenance is necessary to prevent hair buildup. It is recommended to clean out the hair after each use or whenever you notice a decrease in cutting performance.
Q: Can I adjust the blades of my wall clippers without removing them?
A: It is generally better to remove the blades to ensure thorough cleaning and proper alignment.
Q: Is it normal for wall clippers to heat up during use?
A: Yes, it is normal for clippers to generate heat during use. However, if they become excessively hot, it is essential to let them cool down to avoid any potential damage.
