Achieve Perfect Fitment with Droplet Installations
Table of Contents:
- Introduction
- Installation of Droplets
- 2.1 Rear Fitment Issues
- 2.2 Supply of Plates and Hardware
- 2.3 Installation Process
- Removing and Replacing Hub
- 3.1 Removing the Brake Lines
- 3.2 Removing the Camber Plates
- 3.3 Assessing Clearance
- Ensuring Proper Fitment
- 4.1 Testing Clearance
- 4.2 Bumper Flaring Issue
- 4.3 Adjusting Bolt Length
- Finalizing the Installation
- 5.1 Bleeding the Brakes
- 5.2 Securing Cables and Axle
- 5.3 Evaluating Height Adjustment
- Conclusion
Installing Droplets for Improved Car Fitment
Are you struggling with the fitment of your car's rear wheels? Do they not align properly with the front wheels, making the overall look of your car less than satisfying? In this article, we will guide you through the installation process of droplets, a product designed to improve the fitment of your car and provide a sleek appearance. By following our step-by-step instructions, you can achieve the desired fitment and enhance the overall aesthetics of your vehicle.
2. Installation of Droplets
2.1 Rear Fitment Issues
When it comes to car modifications, achieving the perfect fitment is crucial for car enthusiasts. However, many encounter problems with the rear fitment, which may not match the front wheels, leading to an imbalanced and unappealing appearance. The installation of droplets offers a practical solution to this issue, ensuring a seamless fitment that aligns with the front wheels.
2.2 Supply of Plates and Hardware
To begin the installation process, you will need droplet plates supplied by Bad Boys, a reputable manufacturer in the automotive industry. These plates might be unfinished, requiring you to paint them according to your preference. With each droplet plate, you will also receive the necessary hardware, ensuring a secure and long-lasting installation.
2.3 Installation Process
The installation of droplets is relatively straightforward, comparable to installing camber plates. You will need to remove the existing camber plates and replace them with the droplet plates. This process involves removing the hub cover, followed by the four bolts that secure the camber plates. Carefully take out the camber plates and proceed to install the droplet plates. While minor adjustments to the brake lines and cable ties may be necessary, these can be easily managed during the installation process. Once the droplet plates are in place, you can proceed with bleeding the brakes and ensuring proper alignment.
3. Removing and Replacing Hub
3.1 Removing the Brake Lines
When working on car modifications, it is essential to handle the brake lines with caution. In the installation of droplets, it may not be necessary to completely remove the brake lines. However, depending on the height of the hub after installing the droplet plates, you might need to unclick them from their current position to prevent any interference or damage.
3.2 Removing the Camber Plates
With the hub cover removed, you can easily access the camber plates. The camber plates are located at the rear and are secured by four bolts. Unscrew these bolts and carefully remove the camber plates. These will be replaced by the droplet plates, providing a more effective solution for improved fitment.
3.3 Assessing Clearance
After removing the camber plates, take a moment to assess the clearance and space available for the installation of the droplet plates. Ensure that there are no obstacles or components that may interfere with the proper fitment.
4. Ensuring Proper Fitment
4.1 Testing Clearance
Once the droplet plates are in place, it is essential to test the clearance and ensure that there are no issues. Pay close attention to any obstructions, such as the bumper flaring or interference with other components. By testing the fitment and making any necessary adjustments, you can achieve the desired look and performance.
4.2 Bumper Flaring Issue
One common challenge faced during the installation of droplets is bumper flaring. This occurs when the wheel pushes further back after the installation, resulting in the bumper appearing slightly misaligned. While this may cause concern, it is important to note that this can be managed by making slight adjustments and potentially considering a smaller spacer size.
4.3 Adjusting Bolt Length
During the installation process, you may encounter a situation where the bolt length of the droplet plate is too long, causing it to touch the original hub bolts. In such cases, it's necessary to trim the bolts by removing a few threads to ensure a proper fit. While this adjustment may seem minor, it significantly impacts the overall fitment and alignment of the rear wheels.
5. Finalizing the Installation
5.1 Bleeding the Brakes
With the droplet plates securely in place, the final step involves bleeding the brakes. This process ensures that any air bubbles are removed from the brake lines, allowing for optimal braking performance. It is crucial to follow the proper bleeding procedure to achieve the best results.
5.2 Securing Cables and Axle
To prevent any potential issues in the future, it is essential to secure the cables, including the handbrake cable and brake lines, to the axle. This prevents them from snapping and ensures a long-lasting installation. By using cable ties, you can secure the cables effectively and minimize the risk of any unwanted issues.
5.3 Evaluating Height Adjustment
After completing the installation and securing all components, take a moment to evaluate the overall height adjustment. The car should now exhibit more even height distribution, with the rear sitting on a similar level to the front. This adjustment not only enhances the appearance but also improves the car's performance and handling.
6. Conclusion
By installing droplets on your car, you can achieve a remarkable transformation in terms of fitment and appearance. This installation process, though seemingly complex, becomes much simpler when following the step-by-step instructions provided. Remember to pay attention to minor details, such as clearance, bumper flaring, and properly securing components. Once completed, enjoy the enhanced fitment and aesthetic appeal of your car.
Highlights:
- Improved fitment for rear car wheels with the installation of droplets
- Supply of droplet plates and hardware by Bad Boys
- Straightforward installation process comparable to camber plates
- Removing and replacing camber plates for proper fitment
- Testing clearance and addressing bumper flaring issues
- Adjusting bolt length for a secure fit
- Finalizing with bleeding the brakes and securing cables and axle
- Evaluating height adjustment for a well-balanced appearance
Frequently Asked Questions:
Q: Can droplets be installed on any type of car?
A: Yes, droplets can be installed on various car models, as they provide a universal fitment solution. However, it is always recommended to consult with a professional or contact the manufacturer for compatibility information.
Q: Will the installation of droplets affect the car's performance or handling?
A: The installation of droplets should not significantly impact the car's performance or handling. However, it is crucial to ensure that all components are properly secured and aligned for optimal results.
Q: Can the droplet plates be customized to match the car's color?
A: Yes, the droplet plates can be painted or customized to match the desired color or aesthetic of the car.
Q: Are there any potential issues or drawbacks to consider when installing droplets?
A: While droplets offer improved fitment, there are a few considerations to keep in mind. These include potential clearance issues, bumper flaring, and the need for occasional adjustments. It is essential to properly assess the impact on the car's appearance and make any necessary modifications accordingly.
Q: Can droplets be removed once installed?
A: Yes, droplets can be removed if desired. However, it is important to note that removing them may require additional adjustments and potentially impact the overall fitment of the car. Consider consulting with a professional before removing droplets.
Resources:
