Master the Break-in Method for your Hockey Goalie Glove

Table of Contents

1. Introduction
2. The CCM Premier Pro Glove
3. The Break-in Method
   • Required Materials
   • Heating up the Glove
   • Flipping the Glove
   • Heating up the Foams
   • Testing the Temperature
4. Closing the Glove
   • Checking the Straps
   • Achieving the Desired Break
   • Wrapping the Glove
   • Adding Weight
   • Leaving the Glove Undisturbed
5. Unwrapping the Glove
6. Additional Step for Complete Opening
7. Testing the Glove
8. Conclusion

How to Break in a Goalie Glove: A Comprehensive Guide

Introduction:

Welcome to this highly requested video on how to break in a goalie glove. In this guide, we will walk you through a step-by-step process to make your CCM Premier Pro Glove easier to close and achieve maximum performance on the ice. With the right technique, you'll be able to block and catch pucks effortlessly. So let's get started!

The CCM Premier Pro Glove

Before we dive into the break-in method, let's take a moment to appreciate the features of the CCM Premier Pro Glove. As you may have seen in the unboxing video, this glove has a great closure right out of the box. However, with a little extra effort, we can enhance its closure and ensure it becomes as wide as possible, providing an optimal blocking surface.

The Break-in Method

Required Materials

To begin the break-in process, gather the following materials:

• Towel
• Water
• Weight or couch

Heating up the Glove

Start by turning on the faucet and setting it to its hottest temperature. It is crucial to use water that is appropriately hot but not scalding. Position your glove under the running water, creating a small hill to allow the water to run over the outside of the palm. The goal is to heat up the foams and material, making it easier to close the glove later. Keep the water running over the glove's outside for a full minute.

Flipping the Glove

After one minute, flip the glove over and run the water down the inside of the cuff. This step ensures that all the foams inside the palm, especially the break area, are heated equally. Again, continue running the water for another minute, making sure it gets inside the cuff and covers the entire break.

Testing the Temperature

Once you've completed the water heating process, cautiously remove the glove from the water and check its temperature. Ensure it is comfortable enough to insert your hand, taking note of any hotter water temperature variations. Once deemed safe, gently close the glove, paying attention to the desired closure. Also, double-check that the strapping is correctly adjusted for consistent performance during gameplay.

Wrapping the Glove

To maintain the desired break and protect your equipment or couch, carefully wrap the glove with a towel. Make sure the glove remains tightly closed within the towel, covering the entire glove surface to prevent any water leakage. Find a weighty object, such as a couch or weights, to place on top of the wrapped glove. This additional pressure ensures the glove maintains its closed position during the next 24 hours.

Leaving the Glove Undisturbed

Now comes the waiting period. Leave the glove underneath the weight or couch for a full 24 hours without disturbing it. This time allows the Break-in Method to take effect fully, enhancing the closure and creating an optimal break for improved catching and stick handling.

Unwrapping the Glove

After the 24-hour mark, return to your glove and gently unwrap it. You'll notice that the glove no longer opens easily, indicating a successful break-in process. Despite the initial resistance, it will be slightly moist inside, enabling smooth closure. Test the glove by putting your hand in and ensuring it opens and closes effortlessly along the desired break area.

Additional Step for Complete Opening

For those seeking an even wider opening, an additional step can be added. Place the towel back underneath the glove and ensure it is fully open. Apply a slight force to push the glove down onto the towel's surface and then re-wrap it. This step ensures the glove opens completely while protecting your equipment. Leave it undisturbed for an extra 12 hours, or longer if desired.

Testing the Glove

Once the additional period has elapsed, unwrap the glove again, and you will be delighted to find it completely open. Test it by inserting your hand and confirming the wide opening and appropriate strapping. Congratulations! You now have a beautifully broken-in goalie glove ready for the next game or practice.

Conclusion

In conclusion, breaking in a goalie glove may require some time and effort, but the results are worth it. By following the Break-in Method outlined in this guide, you can achieve a glove that closes easily yet opens wide, allowing you to make crucial saves and have better control during gameplay. Remember to take the necessary precautions, and give it a try. Good luck, and see you on the ice!

Highlights:

• Learn how to break in a goalie glove using the proven Break-in Method.
• Enhance the closure of your CCM Premier Pro Glove for effortless blocking and catching.
• Follow the step-by-step guide to achieve the optimal break in your glove.
• Test the glove and experience the improved performance on the ice.
• Give your glove the attention it deserves for an enhanced goaltending experience.

FAQ

Q: How long does it take to break in a goalie glove using this method? A: The Break-in Method outlined in this guide typically takes 24 hours, followed by an additional 12 hours for optimal results. However, you can adjust the timing based on personal preference.

Q: Can I use this method for other brand goalie gloves? A: While this method is specifically tailored for the CCM Premier Pro Glove, you can apply similar principles to break in gloves from other brands. However, it's always best to consult the manufacturer's guidelines for the specific glove you own.

Q: Is it necessary to use a towel and weight during the break-in process? A: The towel and weight help maintain the closed position of the glove, allowing the break-in process to take full effect. They also protect your equipment or couch from any potential water leakage. If you don't have a weight or couch, you can use other heavy objects to achieve the same result.