Master the Model 8785 Bloomfield Copy Machine with Our Vendor Academy
Table of Contents
- Introduction
- Model 8785 Bloomfield Copy Machine
- 2.1 Opening Procedure
- 2.2 Precautions for Operating without Water
- 2.3 Warranty Coverage
- Connecting the Brewer to Electrical Power
- Filling the Tank with Water
- 4.1 Procedure for Filling the Tank
- 4.2 Ensuring Proper Water Flow
- 4.3 Preventing Splashing or Overflowing
- Starting the Brew Cycle
- 5.1 Placing an Empty Airpot or Server
- 5.2 Note on Pouring Cold Water
- Cleaning Procedure
- 6.1 Disconnecting the Brewer
- 6.2 Removing Airpod or Thermal Server
- 6.3 Cleaning the Brew Head and Spray Disk
- 6.4 Wiping the Brew Head Area
- Washing the Spray Disk and Brew Chamber
- Reassembling the Brewer
- Cleaning and Sanitizing Airpots and Thermal Servers
- Scaling the Water Tank
- 10.1 Part Identification
- 10.2 Indicator Light
- 10.3 Brew Chamber Jam
- 10.4 Thermal Server
- 10.5 Water Basin Pan
- 10.6 Heater
- 10.7 Additional Parts
- Conclusion
Model 8785 Bloomfield Copy Machine
The Model 8785 Bloomfield Copy Machine is a high-quality copy machine that offers superior performance and durability. Whether you need to make copies at home or in a professional setting, this copy machine is designed to meet your needs.
2. Opening Procedure
Before operating the Model 8785 Bloomfield Copy Machine, it is essential to follow the proper opening procedure to ensure optimal performance and longevity. Here are the steps to follow:
- Pull up the tank and fill it with water. This step is crucial as the heating element can be damaged if the machine is allowed to operate without being submerged in water.
- Make sure the tank is fully filled with water to avoid any damage caused by operating the brewer without water. Remember that damages caused by this will not be covered by the warranty.
3. Precautions for Operating without Water
Operating the Model 8785 Bloomfield Copy Machine without water can lead to severe damage to the machine and may void the warranty. To avoid any potential issues, always ensure that the tank is filled with water before connecting the brewer to the electrical power.
4. Warranty Coverage
It is vital to understand the warranty coverage for the Model 8785 Bloomfield Copy Machine. While the machine is covered under warranty, it's important to note that damages caused by operating the brewer without water in the tank are not covered. Be sure to follow the proper operating procedures to avoid any issues with warranty claims.
5. Connecting the Brewer to Electrical Power
After ensuring that the tank is filled with water, you can proceed to connect the Model 8785 Bloomfield Copy Machine to an electrical power source. This step should only be done when the tank is filled to avoid any potential damage to the machine.
6. Filling the Tank with Water
To fill the tank with water, follow the steps below:
6.1 Procedure for Filling the Tank
- Pull the lever upwards to open the pour-over opening.
- Pour water into the brewer until it reaches the desired level.
- Close the pour-over opening.
6.2 Ensuring Proper Water Flow
After filling the tank, check if water flows from the brew head. This ensures that the water is properly circulating within the machine.
6.3 Preventing Splashing or Overflowing
To prevent splashing or overflowing hot liquids during the brew cycle, always place an empty airpot or server under the brew chamber before starting the brew cycle. Failure to comply with this precaution can cause serious burns.
7. Starting the Brew Cycle
Once the tank is filled with water and the necessary precautions are taken, you can start the brew cycle. Follow the steps below:
7.1 Placing an Empty Airpot or Server
Before starting the brew cycle, make sure to place an empty airpot or server under the brew chamber to collect the brewed coffee. This ensures a clean and efficient brewing process.
7.2 Note on Pouring Cold Water
Avoid pouring any amount of cold water into the pour-over opening and basin pan while the brewer is in use. Doing so can force hot water out of the tank, resulting in potential hazards. Always handle the machine with caution during the brewing process.
8. Cleaning Procedure
Properly cleaning the Model 8785 Bloomfield Copy Machine is essential for maintaining its performance and longevity. Here is the step-by-step cleaning procedure:
8.1 Disconnecting the Brewer
Before starting the cleaning process, disconnect the brewer from the electrical power source. This ensures safety during the cleaning procedure.
8.2 Removing Airpod or Thermal Server
To clean the machine effectively, remove the airpod or thermal server and empty the brew chamber. This allows for thorough cleaning of the internal components.
8.3 Cleaning the Brew Head and Spray Disk
Remove the spray disk from the brew head by pressing up on the spray disk ears and turning it to the left to enlarge the opening. Remove the gasket from inside the brew head and wipe the inside of the brew head with a soft, clean cloth or sponge.
8.4 Wiping the Brew Head Area
After cleaning the brew head, wipe the area around the brew head with a clean towel, ensuring all surfaces are free from residue or buildup.
9. Washing the Spray Disk and Brew Chamber
To thoroughly clean the spray disk, wash it in a sink using warm water and mild detergent. Rinse the spray disk with clean water and allow it to air dry. Similarly, wash the brew chamber in a sink using warm water and mild detergent. Wipe the exterior surfaces to remove any soil or paste. Make sure to clean the equipment thoroughly to maintain its performance.
10. Reassembling the Brewer
After cleaning the different components of the Model 8785 Bloomfield Copy Machine, it's time to reassemble the brewer. Follow the reverse order of the disassembly process, ensuring that all parts are properly placed and securely reattached.
11. Cleaning and Sanitizing Airpots and Thermal Servers
Properly cleaning and sanitizing airpots and thermal servers is crucial for maintaining the quality and taste of the brewed coffee. Follow these steps for cleaning:
- Fill the airpots and thermal servers with warm soapy water.
- Scrub the inside using a bottle brush to remove any residue or stains.
- Empty the soapy water and rinse with clean water.
- Wipe the exterior surfaces with a soft cloth or sponge.
- Invert the airpots and thermal servers and allow them to air dry completely.
12. Scaling the Water Tank
Over time, the water tank of the Model 8785 Bloomfield Copy Machine may accumulate calcium or lime scale buildup. Proper scaling is necessary to maintain the performance and efficiency of the machine. Follow these steps for scaling the water tank:
12.1 Part Identification
To scale the water tank properly, you need to identify the following parts:
- Indicator Light
- Brew Chamber Jam
- Thermal Server
- Water Basin Pan
- Heater
- Additional Parts (Bench Tube Gasket, Elbow Inlet, Elbow Outlet)
12.2 Indicator Light
The indicator light serves as a visual reference to indicate when the equipment is ready to brew.
12.3 Brew Chamber Jam
The brew chamber jam is where the ground coffee is placed to initiate the brewing process.
12.4 Thermal Server
The thermal server collects and stores the brewed coffee, keeping it hot for an extended period.
12.5 Water Basin Pan
The water basin pan holds the water before it is heated and pumped into the brew chamber.
12.6 Heater
The heater is responsible for heating the water to the desired brewing temperature.
12.7 Additional Parts
The bench tube gasket, elbow inlet, elbow outlet, and gasket elements are crucial components that ensure proper water flow and brewing efficiency.
13. Conclusion
In conclusion, the Model 8785 Bloomfield Copy Machine is a reliable and efficient copy machine that can fulfill your copying needs. By following the provided procedures for opening, connecting, filling, starting, and cleaning the machine, you can ensure its optimal performance and longevity. Proper maintenance and periodic scaling of the water tank will further enhance its efficiency. Enjoy the convenience and quality that this copy machine brings to your copying tasks.
Highlights
- The Model 8785 Bloomfield Copy Machine offers superior performance and durability.
- Proper opening procedure and precautions are essential for operating the machine without issues.
- Warranty coverage does not extend to damages caused by operating the brewer without water.
- Fill the tank with water before connecting the brewer to the electrical power for safe operation.
- Follow the steps for filling the tank and ensure proper water flow to prevent any splashing.
Resources: