Step-by-Step Guide: Installing and Setting up the Eve Outdoor Cam
Table of Contents
- Introduction
- Safety Precautions
- Unboxing the Package
- Checking Wi-Fi Coverage
- Disconnecting Power
- Installing the Mounting Plate
- Mounting the Eve Outdoor Cam
- Connecting the Eve Outdoor Cam
- Setting Up the Eve Outdoor Cam
- Conclusion
Introduction
Installing a security camera for your outdoor area is a great way to enhance the safety and security of your property. In this article, we will guide you through the step-by-step process of installing the Eve Outdoor Cam. From unboxing the package to setting up the camera, we will cover everything you need to know to get started. So let's dive in and learn how to install the Eve Outdoor Cam!
Safety Precautions
Before we begin, it's important to prioritize safety. The installation of the Eve Outdoor Cam involves electrical connections and working at heights. Therefore, we recommend consulting a qualified electrician if you are unsure or uncomfortable with the installation process. Additionally, make sure to follow all appropriate electrical codes and regulations to ensure a safe installation.
Unboxing the Package
When you open the package of the Eve Outdoor Cam, you will find several components. These include the Eve Outdoor Cam itself, a manual with the home kit setup code, video surveillance stickers, a mounting ring, a mounting cover, a mounting plate, a mounting clip, an ingress seal bracket, wall anchors, screws, a mounting bracket, connection terminals, and an Allen key. It's essential to keep all these components organized and in a safe place for future reference.
Checking Wi-Fi Coverage
Before proceeding with the installation, it's crucial to check the Wi-Fi coverage in the outdoor area where you plan to install the Eve Outdoor Cam. Outdoor locations often present challenging conditions for Wi-Fi reception. To ensure a reliable connection, make sure that the Wi-Fi coverage is sufficient at the desired location. The Eve Outdoor Cam connects exclusively to 2.4 gigahertz Wi-Fi networks, so ensure your network meets this requirement for greater range and reliability. To check the coverage using your iPhone:
- Connect your iPhone to a 2.4 gigahertz Wi-Fi network.
- Hold your iPhone close to the wall at the desired installation location.
- Wait for at least 10 seconds and check the Wi-Fi signal strength on your iPhone.
- You should have at least two bars of reception for a reliable connection.
- If the signal is weak or doesn't reach the desired location, you may need to move your Wi-Fi access point closer, use a Wi-Fi repeater or an additional mesh node, or choose a different location for the Eve Outdoor Cam.
Disconnecting Power
Before installing the Eve Outdoor Cam, it's essential to disconnect the power supply to the existing outdoor light. This ensures your safety throughout the installation process. Here's how to disconnect the power:
- Locate the fuse connected to your existing outdoor light in the fuse box.
- Switch off the fuse to cut off the power supply.
- After switching off the fuse, toggle the associated light switch on and off to ensure there is no current flowing to the light fixture.
Installing the Mounting Plate
To begin the installation, you will need to install the mounting plate. Follow these steps:
- Disassemble and remove your existing outdoor light, if present.
- Please note that the Eve Outdoor Cam requires both a neutral wire and a connection to a ground wire. If these wires are not present, the Eve Outdoor Cam is not compatible with this location.
- Position the mounting plate on the wall, ensuring the up arrow is pointing upwards.
- Trace the screw holes on the wall.
- Drill into the tracings and insert the supplied wall anchors.
- If your existing outdoor light has appropriately spaced wall anchors, you may use them instead.
- Ensure that the up arrow on the mounting plate is pointed upwards or horizontally to the left or right.
- Place the mounting bracket on top of the mounting plate and secure them using the supplied screws.
Mounting the Eve Outdoor Cam
Now that the mounting plate is securely installed, it's time to mount the Eve Outdoor Cam. Follow these steps:
- Place the mounting cover on top of the mounting bracket, ensuring the cable inlet is at the top.
- Place the mounting ring with the moisture outlet facing downwards and twist it to the left to secure it.
- Snap the mounting clip into the recessed area of the mounting cover.
- Turn the supplied mounting screw clockwise to attach the Eve Outdoor Cam. Hold the camera in place until the screw is sufficiently fastened. There is no need to fully tighten the screw or use the Allen key at this stage. Your fingers will suffice.
Connecting the Eve Outdoor Cam
With the Eve Outdoor Cam securely mounted, it's time to connect the necessary wires. Follow these steps:
- Pass the power cable through the cable inlet of the Eve Outdoor Cam.
- Turn the camera upside down and open the mounting ring by twisting it to the right and pulling it towards you.
- Pass the cable through the wall mount, ensuring the ingress seal sits flush with the mounting cover.
- Secure the ingress seal with the ingress seal bracket.
- Connect the corresponding wires from your power cable to the Eve Outdoor Cam using the supplied connection terminals.
- Turn the Eve Outdoor Cam back to its original position and stow the terminals and cables in the wall mount.
- Push the mounting ring towards the wall and twist it to the left to secure it. Ensure the moisture outlet continues to face downwards.
Setting Up the Eve Outdoor Cam
Now that the Eve Outdoor Cam is installed and connected, it's time to set it up. Follow these steps:
- Align the Eve Outdoor Cam as desired and fully secure it using the supplied Allen screw.
- Switch on the fuse associated with the outdoor light in your fuse box.
- The status LED on the Eve Outdoor Cam should now turn on.
- Download the Eve app from the App Store if you haven't already.
- Open the Eve app and tap "Add Accessories" to add the Eve Outdoor Cam.
- Use the home kit code found on the back of the manual to add the camera.
- Follow the on-screen instructions provided by Eve to complete the setup process.
- Select the room where the Eve Outdoor Cam is located and choose a name for it.
- Adjust the streaming and recording settings for when you're home and away. The settings for the built-in automatic motion light can be adjusted later in the accessory settings of the Eve app.
Conclusion
Congratulations! You have successfully installed and set up the Eve Outdoor Cam. With its advanced features, such as motion detection and HD video recording, your property will be well-protected. Enjoy the peace of mind that comes with having a reliable outdoor security camera system.
Highlights
- Step-by-step installation guide for the Eve Outdoor Cam
- Ensuring safety precautions throughout the installation process
- Checking Wi-Fi coverage for optimal performance
- Disconnecting power to the existing outdoor light
- Installing the mounting plate securely
- Mounting the Eve Outdoor Cam with the supplied equipment
- Connecting the necessary wires for power supply
- Setting up the Eve Outdoor Cam using the Eve app
- Adjusting streaming and recording settings for personal preferences
- Enjoying the peace of mind provided by the Eve Outdoor Cam
FAQ
Q: Can I install the Eve Outdoor Cam myself, or do I need professional help?
A: While it is possible to install the Eve Outdoor Cam yourself, we recommend consulting a qualified electrician if you are unsure or uncomfortable with the installation process. Safety should always be a top priority.
Q: Does the Eve Outdoor Cam require a specific type of Wi-Fi network?
A: Yes, the Eve Outdoor Cam connects exclusively to 2.4 gigahertz Wi-Fi networks. Ensure that your network meets this requirement for optimal range and reliability.
Q: Can I adjust the camera angle of the Eve Outdoor Cam?
A: Yes, the Eve Outdoor Cam offers a 3-axis camera angle adjustment, allowing you to easily adapt the camera angle to your specific needs.
Q: Can I control the motion light settings of the Eve Outdoor Cam?
A: Yes, the motion light settings can be adjusted in the accessory settings of the Eve app. You can customize the sensitivity and duration of the motion light according to your preferences.
Q: Can I access the live video feed from the Eve Outdoor Cam remotely?
A: Yes, you can access the live video feed and control the Eve Outdoor Cam remotely using the Eve app. This allows you to monitor your outdoor area from anywhere at any time.
Resources:
Note: The content in this article is based on the assumption that the reader has already purchased the Eve Outdoor Cam and is looking for installation instructions.
