Step-by-Step Guide: Installing Automatic Start in Your Toyota Highlander 2020
Table of Contents
- Introduction
- The Automatic Start Installation Cost
- The Aftermarket Option for Automatic Start
- The DIY Approach to Installing Automatic Start
- Taking Apart the Dashboard and Steering Column
- Removing the Bursting Steel Wheel Screws
- Removing the Panel and Latch
- Locating the Automatic Start Module
- Understanding the Wiring Connections
- Reassembling the Dashboard and Steering Column
Introduction
The Automatic Start Installation Cost
The Aftermarket Option for Automatic Start
The DIY Approach to Installing Automatic Start
Taking Apart the Dashboard and Steering Column
Removing the Bursting Steel Wheel Screws
Removing the Panel and Latch
Locating the Automatic Start Module
Understanding the Wiring Connections
Reassembling the Dashboard and Steering Column
🚘 How to Install Automatic Start in Your Toyota Highlander 2020
Are you tired of manually starting your Toyota Highlander every time you need to leave? Installing an automatic start system can make your life easier by allowing you to conveniently start your car with the push of a button. In this guide, we will walk you through the process of installing an automatic start system in your Toyota Highlander 2020. From the cost of installation to the DIY approach, we've got you covered. Let's get started!
💲 The Automatic Start Installation Cost
Before you decide to install an automatic start system in your Toyota Highlander, it's essential to consider the cost. On average, the installation of an automatic start system can range from $150 to $400, depending on various factors such as the brand and features of the system. However, if you opt for the installation at the dealership, the cost can be even higher.
🛠️ The Aftermarket Option for Automatic Start
If you're looking for a more affordable alternative to the dealership installation, considering an aftermarket automatic start system is a great option. By choosing an aftermarket system, you can save some dollars without compromising the functionality of the system. There are several reputable brands like 12 Volt Electronics that offer high-quality aftermarket automatic start systems for around $249.
🔧 The DIY Approach to Installing Automatic Start
For the do-it-yourself enthusiasts, installing an automatic start system on your own can be a rewarding project. With the right tools and guidance, you can successfully install the system and save a significant amount of money. To begin the installation process, you'll need a flathead and Phillips screwdriver, as well as a set of automotive tools from Harbor Freight.
🧰 Taking Apart the Dashboard and Steering Column
To access the necessary components for installing the automatic start system, you'll first need to take apart the dashboard and steering column. Start by popping down the steering column and lifting it all the way out. Lock the steering in place and turn it to the desired starting position. Remove the Phillips screws that hold the panel in place.
🔩 Removing the Bursting Steel Wheel Screws
As you continue with the disassembly process, you'll need to remove the bursting steel wheel screws. These screws secure the steering column and need to be carefully popped off. Use automotive tools, such as plastic hooks, to remove the screws without scratching or damaging the components.
📦 Removing the Panel and Latch
After removing the bursting steel wheel screws, it's time to remove the panel and latch. This step requires some caution to avoid breaking or damaging the parts. Follow the instructions carefully and gently pull the panel down until it comes off completely. Pay attention to any modules or wiring connections that may be present.
💡 Locating the Automatic Start Module
Once the panel is removed, you can now locate the automatic start module. Depending on the installation, it may be spliced into the wiring harness. Take a close look at the module and identify any wiring connections or modifications that have been made.
🔌 Understanding the Wiring Connections
Understanding the wiring connections is crucial when installing an automatic start system. Take note of the wires that have been spliced into the existing harness. Ensure that all connections are secure and properly insulated to avoid any electrical issues in the future.
🛠️ Reassembling the Dashboard and Steering Column
After completing the installation of the automatic start system, it's time to reassemble the dashboard and steering column. Follow the disassembly steps in reverse, making sure to align all the components correctly. Be prepared for slight differences in the reassembly process, as it may not go back exactly as it was before.
Congratulations! You have successfully installed an automatic start system in your Toyota Highlander 2020. Now you can enjoy the convenience of starting your car with ease, especially during hot or cold weather. Remember to refer to the manufacturer's instructions and seek professional assistance if needed during the installation process.
Highlights
- Installing an automatic start system in your Toyota Highlander 2020 can save you time and add convenience to your daily routine.
- The cost of installation for an automatic start system can vary depending on factors such as the brand and features, but an aftermarket option can provide affordability without compromising functionality.
- Taking apart the dashboard and steering column is necessary to access the components for installation, and a DIY approach can be a rewarding project for those with the right tools and guidance.
- Careful removal of the bursting steel wheel screws and panel/latch is essential to avoid damaging the parts and ensuring a successful installation.
- Understanding the wiring connections and locating the automatic start module are crucial steps in the installation process, ensuring proper functionality and avoiding electrical issues in the future.
- Reassembling the dashboard and steering column completes the installation process, although slight differences may occur during reassembly.
Frequently Asked Questions
Q: Can I install an automatic start system in my Toyota Highlander 2020 myself?
A: Yes, it is possible to install an automatic start system on your own if you have the right tools and guidance. However, it is essential to have a good understanding of the process before attempting the installation.
Q: How much money can I save by installing an aftermarket automatic start system instead of going to the dealership?
A: By opting for an aftermarket automatic start system, you can potentially save a significant amount of money compared to the dealership installation. Aftermarket systems can cost around $249, while dealership installations can range from $150 to $400.
Q: What tools do I need to take apart the dashboard and steering column?
A: To take apart the dashboard and steering column, you will need a flathead screwdriver, a Phillips screwdriver, and a set of automotive tools, such as plastic hooks, from Harbor Freight.
Q: Are there any risks involved in installing an automatic start system myself?
A: Installing an automatic start system yourself carries some risk, especially if you are not familiar with the process. It's crucial to follow instructions carefully and seek professional assistance if needed to avoid any damage to your vehicle.
Q: Can I revert the installation of the automatic start system if I change my mind?
A: Yes, it is possible to revert the installation of the automatic start system if you decide you no longer want it. However, it may require some additional work to remove the system and restore the vehicle to its original state.
Resources:
