Step-by-Step Guide: Installing Remote Start on Infiniti QX60
Table of Contents:
- Introduction
- Step 1: Removing the Cluster
- Step 2: Removing the PCM
- Step 3: Wiring the Remote Start
- Step 4: Loading Car Settings
- Step 5: Programming the Module
- Step 6: Testing the Remote Start
- Conclusion
- Pros and Cons
- Frequently Asked Questions
Introduction:
Installing a remote start on your KX35 2013 can provide you with added convenience and comfort. In this guide, we will walk you through the step-by-step process of installing a remote start on your car. We will cover everything from removing the cluster and PCM to wiring the remote start and programming the module. By the end of this guide, you'll be able to enjoy the benefits of a remote start system on your KX35 2013.
Step 1: Removing the Cluster
The first step in installing a remote start on your KX35 2013 is to remove the cluster. The PCM (Powertrain Control Module) is located behind the cluster, so it needs to be removed in order to access it. To remove the cluster, follow these steps:
- Cut the cover on one side to reveal two screws.
- Remove the screws and pop up the cluster.
- Pry around the cluster until it comes off.
- Note: Be careful not to damage any connectors.
- Disconnect the plug connector from the cluster.
Step 2: Removing the PCM
Once the cluster is removed, you can proceed to remove the PCM. The PCM is located on the back of the cluster. Follow these steps to remove the PCM:
- Locate the three Phillips screws on the PCM.
- Remove the screws and lift the PCM up.
- Unplug the connectors from the PCM.
Step 3: Wiring the Remote Start
After removing the PCM, it's time to wire the remote start. Follow these steps to wire the remote start system:
- Identify the number one and number five wires.
- Cut the wires at the designated points.
- Connect the white wire (number five) to the positive terminal.
- Connect the black wire (number one) to the negative terminal.
Step 4: Loading Car Settings
Once the remote start system is wired, you need to load the car settings onto the module. Follow these steps to load the car settings:
- Download the 14th software for your computer.
- Install the software and enter the provided login information.
- Connect the decoder and ensure it turns green.
- Load the car settings for your specific model.
Step 5: Programming the Module
With the car settings loaded, it's time to program the module. Follow these steps to program the module:
- Press the designated button twice without pressing the brake pedal.
- Wait for the module's lights to start blinking alternately.
- Connect all the connectors to the module.
- Press the button on the module again.
- Wait for the lights to blink alternatively.
- Connect the black connector to the module.
Step 6: Testing the Remote Start
Once the module is programmed, you can test the remote start system. Follow these steps to test the remote start:
- Turn off the car and go outside.
- Use the remote control to start the car.
- Check if the car starts and the lights blink.
- Press the brake pedal to disengage the remote start and start driving.
Conclusion
Congratulations! You have successfully installed a remote start system on your KX35 2013. Enjoy the convenience of starting your car remotely and stay comfortable in any weather. Remember to follow the steps carefully and ensure all connections are secure. If you have any questions or need further assistance, refer to the user manual or consult a professional.
Pros and Cons
Pros:
- Added convenience of remote car starting
- Comfortable car temperature even before entering
- Can be a valuable security feature
Cons:
- Installation process can be complicated for beginners
- Requires careful handling of wires and connectors
- May require professional help for certain steps
Frequently Asked Questions
Q: Can I install a remote start system myself?
A: Yes, you can install a remote start system yourself, but it requires some technical knowledge and skills. If you're not confident in your abilities, it's recommended to seek professional help.
Q: Can a remote start system void my car's warranty?
A: In most cases, a properly installed remote start system will not void your car's warranty. However, it's always best to check with your car manufacturer or dealership to be sure.
Q: Is a remote start system compatible with all car models?
A: Remote start systems may vary depending on the car make and model. It's important to choose a remote start system that is compatible with your specific car model.
Q: How far can I start my car with a remote start system?
A: The range of a remote start system can vary depending on the model and environmental factors. Typically, the range can be up to a few hundred feet.
Q: What should I do if the remote start system is not working properly?
A: If you're experiencing problems with your remote start system, it's recommended to check the wiring connections and consult the user manual for troubleshooting steps. If the issue persists, it's best to seek professional assistance.
Resources:
