Comment effectuer l'entretien de votre système de filtration de piscine

Comment effectuer l'entretien de votre système de filtration de piscine

Table of Contents

1. Introduction
2. Isolating the Power Supply to the Chemical Dosing System
3. Shutting Down the Circulation Pump
4. Closing Filtration Valves
5. Backwashing Filter Number One
6. Rinse Cycle
7. Returning to Normal Filtration
8. Bringing Filter Number Two Online
9. Checking the Plant Room
10. Conclusion

🏊‍♂️ Filtration System Maintenance in Piscine Oceane

Maintaining the circulation system of a swimming pool is crucial for its proper functioning and ensuring clean water for swimmers. In this article, we will guide you through the step-by-step process of maintaining the filtration system in Piscine Oceane. From isolating the power supply to backwashing the filters, we'll cover everything you need to know to keep the pool in top condition.

1. Introduction

Keeping the filtration system of a swimming pool in good working order is essential to ensure crystal clear water and a hygienic environment for swimmers. Regular maintenance tasks, such as isolating the power supply to the chemical dosing system and backwashing the filters, should be carried out to remove impurities and maintain optimal water quality.

2. Isolating the Power Supply to the Chemical Dosing System

Before performing any maintenance tasks on the filtration system, it is crucial to isolate the power supply to the chemical dosing system. This step ensures that no chlorine or CO2 is dosed into the water during the maintenance process. The method of isolating the power supply may vary from plant room to plant room, so refer to the specific instructions for Piscine Oceane.

Pros:

• Prevents chlorine and CO2 dosing during maintenance.

3. Shutting Down the Circulation Pump

Next, it is important to shut down the power to the circulation pump that is currently operating. In the case of Piscine Oceane, pump number two is on duty, while pump number one is on standby. Since this plant room is located below the pool level, gravity ensures that the pipe work remains flooded and the pumps stay primed.

Cons:

• Temporary interruption of water circulation during maintenance.

4. Closing Filtration Valves

To prevent any disturbances to the filters during maintenance, the filtration valves need to be closed. Piscine Oceane's multi-port valves have several positions, including filtration, waste, backwash, recirculation, and rinse. To isolate filter number two, change the valve to the closed position. Remember to rotate the valve handle clockwise to avoid twisting the spider gasket inside.

5. Backwashing Filter Number One

During normal filtration, water enters filter number one and exits through the outlet. However, during backwashing, the water needs to flow in the opposite direction, from the outlet back to the inlet. To achieve this, rotate the multi-port valve to the backwash position. The water will go in through the outlet, out through the inlet, and then drain away. This process cleans the sand bed inside the filter.

6. Rinse Cycle

After backwashing, it is necessary to perform a rinse cycle to re-compact the sand bed inside the filter. The rinse cycle ensures that the sand settles back in place after being agitated during backwashing. Rotate the multi-port valve to the rinse position, and water will flow in from the top, out from the bottom, and continue to drain.

7. Returning to Normal Filtration

Once the rinse cycle is complete, return the filtration system to its normal operation. Rotate the multi-port valve clockwise back to the filtration position. The water will now follow the usual path, entering through the inlet and exiting through the outlet.

8. Bringing Filter Number Two Online

After completing the maintenance on filter number one, it is time to bring filter number two back online. As it was closed off during the backwashing process, it may take a couple of minutes for the filter to reset and resume its regular function. Ensure that the pressure is stable on both filters before proceeding.

Pros:

• Ensures optimal filtration performance.

9. Checking the Plant Room

Before leaving the plant room, it is essential to double-check that everything is back to normal. Confirm that the pressure is restored on both filters, all valves are in their correct positions, and the chemical dosing system is operational again. This final inspection ensures that the filtration system is ready to provide clean and clear water for swimmers.

10. Conclusion

Regular maintenance and proper care of the filtration system are vital for maintaining the quality of water in a swimming pool. The step-by-step process outlined in this article will help keep the filtration system in Piscine Oceane running smoothly and ensure a safe and enjoyable swimming experience for all.

Highlights:

• Ensuring proper maintenance of the filtration system is essential for clean and clear pool water.
• Isolating the power supply to the chemical dosing system prevents chlorine and CO2 dosing during maintenance.
• Shutting down circulation pumps and closing filtration valves are necessary steps in the maintenance process.
• Backwashing and rinsing the filters help clean and re-compact the sand bed for optimal filtration.
• Returning the system to normal operation and checking the plant room ensure the filtration system's proper functioning.

FAQ

Q: How often should the filtration system be maintained? A: Regular maintenance should be performed at least once every month to ensure optimal performance.

Q: Can I perform filtration system maintenance while the pool is in use? A: No, maintenance should be carried out when the pool is closed to swimmers to avoid interruptions in water circulation.

Q: What should I do if there are any issues after performing maintenance on the filtration system? A: If you encounter any problems, such as low pressure or water leaks, contact a qualified technician for assistance.

Q: Can I backwash both filters simultaneously? A: It is recommended to backwash one filter at a time to ensure proper cleaning and re-compaction of the sand bed.