Des moulures courbées : maîtrisez l'art avec une défonceuse !

Table of Contents

1. Introduction
2. Understanding Curved Moldings
3. Making a Template
4. Attaching the Template to the Molding Stock
5. Rough Cutting the Shape
6. Finishing the Curved Edge with a Flush Trim Bit
7. Using a Profiled Router Bit to Cut the Desired Shape
8. Tips for Using Bearing Guided Router Bits
9. Creating Layered Moldings
10. Trimming the Profiles from the Wider Boards
11. Creating a Negative Template for the Back of the Molding
12. Trimming the Moldings from the Larger Work Pieces Using a Negative Template
13. Gluing the Two Molding Pieces Together
14. Applying the Techniques to Larger-Scale Moldings
15. Conclusion

🌟 Highlights

• Learn how to make curved moldings that will elevate your woodworking projects to the next level.
• Discover the step-by-step process of creating curved moldings using templates and router bits.
• Understand the importance of precise measurements and techniques for a seamless finish.
• Explore tips and tricks for using bearing guided router bits and creating layered moldings.
• Get inspired to tackle larger-scale moldings with confidence.

🪚 Understanding Curved Moldings: Elevate Your Woodworking Projects

Curved moldings add a touch of elegance and sophistication to woodworking projects. Many woodworkers shy away from these intricate details due to the perceived complexity involved. However, with the right techniques and tools, creating curved moldings can be a rewarding and achievable endeavor. In this article, we will guide you through the step-by-step process of making curved moldings, from creating templates to gluing the final pieces together. So, let's dive in and take your woodworking projects to another level!

1️⃣ Making a Template

Before delving into the process of creating curved moldings, it is essential to have a template in place. If you already have a project in mind, such as a cabinet, you may have already made templates for the top and bottom panels to ensure a perfect match. However, if you haven't, creating a template with the desired curve is the first step. To make a template, attach your top or bottom panel to a piece of quarter inch MDF using double-sided tape. Use a flush trim bit on your router to trace the curve onto the MDF, creating a master template.

2️⃣ Attaching the Template to the Molding Stock

With the master template ready, it's time to move on to the molding stock. Choose wood that is as wide as the entire curve of the molding and attach the master template to the top using double-sided tape. This will serve as a guide for the routing process. Ensure the template is securely attached to avoid any slips or misalignment during the next steps.

3️⃣ Rough Cutting the Shape

To establish the curves on the molding, start by rough cutting the shape on a bandsaw. Cut as close to the edge of the template as possible without touching it. This will give you a starting point for shaping the molding.

4️⃣ Finishing the Curved Edge with a Flush Trim Bit

To achieve a smooth and precise curved edge, use a flush trim bit on your router. With the template still attached, carefully run the router along the curved edge, trimming away any excess material. Take your time and make multiple passes if necessary, ensuring a clean and consistent shape.

5️⃣ Using a Profiled Router Bit to Cut the Desired Shape

Once the curves are established, remove the template and switch to a profiled router bit to cut the desired shape into the curved edge of the molding. This is where your creativity can shine, as you can choose from a variety of router bits to create intricate and unique profiles. Experiment with different bits to achieve the desired result, constantly checking and refining the shape as you go.

Stay tuned for the next 弯曲模具 article..., where we will explore tips for using bearing guided router bits and creating layered moldings.