Enlevez un poteau de clôture pourri en QUELQUES MINUTES !

Table of Contents

1. Introduction
2. Tools and materials needed
3. Preparation before removing the fence post
   • Checking the post for rot
   • Cutting the post flat
4. Fitting the eye plate
   • Choosing the best area to screw in the screws
   • Using a 17mm socket and impact driver
   • Screwing down the screws
5. Removing the fence post
   • Using a bar and pivot point
   • Sliding the bar into the eyelet
   • Applying force to pull out the post
6. Benefits of using the eye plate method
7. Removing the concrete
8. Installing a new fence post
9. Conclusion
10. Frequently Asked Questions (FAQ)

🛠️ Introduction

In this article, we will discuss a useful technique for removing rotten and broken-off fence posts by using an eye plate method. This method proves to be a time-saving alternative to traditional manual labor. We will cover the necessary tools and materials, the step-by-step process, and the benefits of using this technique.

🧰 Tools and Materials Needed

Before getting started, it is essential to gather the following tools and materials:

• Eye plate (rated to carry at least 500 kilograms)
• Screws (M10, 200 millimeters in length)
• 17mm socket
• Impact driver
• Bar for pivoting
• Blocks or old post for support
• Mallet for hammering in a new post (if needed)

📋 Preparation before Removing the Fence Post

Before diving into the removal process, there are a few necessary steps to take:

Checking the post for rot

Inspect the fence post to identify any signs of rot. The top two inches of the post, both above and below ground level, are most likely to be affected. It is crucial to ensure that there is a good portion of the post that is not rotten and can provide stability during the removal process.

Cutting the post flat

To make it easier to work on the fence post, cut the top of the post flat above ground level. This allows for a level surface to fit the eye plate securely and ensures better screwing into the post.

🛠️ Fitting the Eye Plate

Now, let's move on to fitting the eye plate onto the fence post:

Choosing the best area to screw in the screws

Due to varying degrees of rot, it is essential to select the most reliable areas on the post to screw in the screws. The eye plate is designed to fit perfectly over a four by four post and can accommodate multiple screws.

Using a 17mm socket and impact driver

With the eye plate in place, use a 17mm socket and an impact driver to screw in the screws. Tighten them until the plate sits securely on the post. It may be necessary to screw the screws in at slight angles for better grip.

Pros:

• The eye plate provides a stable and durable solution for removing fence posts.
• The larger holes in the plate allow for the use of bigger screws, enhancing stability.
• The method is relatively quick and straightforward, saving time and effort.

Cons:

• This method may not be suitable for posts with extensive rot or structural damage.

🌳 Removing the Fence Post

Now that the eye plate is securely attached, it's time to remove the fence post:

Using a bar and pivot point

Place an old piece of post or blocks as support, and position the bar on top of them. The bar should be able to fit into the swiveling eye of the eye plate. Adjust the position of the support according to the angle needed for the bar to slide into the eyelet.

Sliding the bar into the eyelet

Slide the bar into the eyelet of the eye plate, ensuring it is in a stable and secure position. This will serve as the pivot point for removing the post.

Applying force to pull out the post

Once the bar is in position, use a pivoting motion to apply force and pull the post out of the ground. If necessary, double up the support posts to increase leverage.

🌟 Benefits of Using the Eye Plate Method

The eye plate method offers several advantages:

1. Time-saving: Removing a fence post using the eye plate method is significantly quicker compared to traditional methods, such as digging.
2. Sturdy and durable: The eye plate, along with the screws, provides a secure and long-lasting solution.
3. Minimal damage: By removing the post intact, there is less disruption to the surrounding concrete or ground.
4. Ease of installation: If the concrete is still sound, a new post can be easily slid into the hole, eliminating the need for extensive concreting.

🧱 Removing the Concrete

After the fence post is removed, it is now possible to clear out any concrete debris:

【Continue the article based on the provided content】.