Upgrade Your Jeep Grand Cherokee with Lasfit LED Low Beam Headlights!

Table of Contents

1. Introduction
2. Installing Last Fit Pro LED Low Beam Headlights
3. Specifications of Last Fit Pro LED Low Beam Headlights
4. Unboxing and Assembly of Last Fit Pro LED Low Beam Headlights
5. Testing the Last Fit Pro LED Low Beam Headlights
6. Comparison with Stock Headlights
7. Tips for Installing Last Fit Pro LED Low Beam Headlights

Installing Last Fit Pro LED Low Beam Headlights

Are you tired of the dim halogen bulbs in your factory-installed projectors? Upgrade to the Last Fit Pro LED Low Beam Headlights for a brighter and more powerful lighting experience. This article will guide you through the process of installing these high-quality headlights on your 2021 Jeep Grand Cherokee.

1. Introduction

Are you looking to enhance the visibility and style of your Jeep Grand Cherokee? Look no further! In this article, we will walk you through the installation process of the Last Fit Pro LED Low Beam Headlights. These headlights are designed to fit 2017 to 2021 Jeep Grand Cherokees with factory-installed projectors that have dim halogen bulbs. Say goodbye to dull and inadequate lighting and say hello to brighter and more efficient LED headlights. Let's get started!

2. Installing Last Fit Pro LED Low Beam Headlights

The installation of Last Fit Pro LED Low Beam Headlights can be approached in two different ways. In this section, we will explain both methods, allowing you to choose the one that works best for you. Please note that the first method may be difficult for individuals with larger hands, so we recommend using a combination of both methods for the best results.

Method 1: Through the Wheel Liner

• Remove the access door located inside the wheel liner on the passenger side.
• Rotate the access door until it pops out and repeat on the driver's side.
• Locate the low beam rubber boot and remove it carefully.
• Disconnect the electrical connector from the factory bulb.
• Rotate the bulb counterclockwise to loosen and remove it.
• Repeat the same steps on the driver's side.
• Unbox the Last Fit Pro LED Low Beam Headlight kit and prepare the bulbs.
• Connect the factory connector to the LED bulb.
• Align the tabs on the bulb with the slots in the headlight housing and rotate clockwise to lock it in place.
• Verify the functionality of the fans on the bulbs and dust caps.
• Stuff the wiring and connectors into the headlight housing.
• Install the new dust caps and secure them in place.
• Repeat the entire process on the driver's side.

Method 2: Through the Engine Bay

• Remove the coolant reservoir and ECM bracket.
• Disconnect the electrical connectors and remove the bolts holding them in place.
• Lift the ECM bracket and move it to the side.
• Remove the air scoop for the intake by releasing the rubber seal and pulling it over the green clip.
• Lift the air filter box out of the engine bay.
• Follow the same installation steps as mentioned in Method 1.
• Reinstall the air filter box, coolant reservoir, and ECM bracket.

3. Specifications of Last Fit Pro LED Low Beam Headlights

Before diving into the installation process, let's take a closer look at the specifications of the Last Fit Pro LED Low Beam Headlights. These headlights offer various features and benefits that enhance your driving experience. Here are the key specifications:

• High-power LED chips providing 100 watts for the whole set (50 watts per bulb)
• 10,000 lumens per set (5,000 lumens per bulb)
• Pure white color temperature of 6000K
• Voltage range of operation: 9 volts to 16 volts
• Error-free design specifically tailored for Jeep Grand Cherokees
• Two-year warranty for peace of mind

Please note that while these bulbs are technically rated as 6K, there is a slight bluish hue present. However, it is not a true 8K color temperature and does not produce a highly blue light.

4. Unboxing and Assembly of Last Fit Pro LED Low Beam Headlights

Upon unboxing the Last Fit Pro LED Low Beam Headlight kit, you will find the bulbs, replacement dust covers, an operation manual, and stickers. If your bulbs come with a plastic protector cover over the diode, remove it before installation. Ensure that all components are intact and of high quality.

If the bulbs are not pre-assembled, you will notice a four-pin connector on the bulb. Align the tabs on the connector and the bulb and tighten the plastic threaded connector for a secure connection.

5. Testing the Last Fit Pro LED Low Beam Headlights

Before proceeding with the installation, it is essential to test the functionality of the Last Fit Pro LED Low Beam Headlights. Ensure that both the bulbs and the dust caps' fans are working correctly. Connect the factory electrical connectors to the bulbs and let them run for a few minutes to ensure proper cooling.

6. Comparison with Stock Headlights

Once the Last Fit Pro LED Low Beam Headlights are installed, it is time to compare them with the stock headlights. Take before and after pictures to see the drastic difference in lighting quality and brightness. The Last Fit Pro LED Low Beam Headlights provide a much brighter and more efficient lighting experience, improving visibility and safety while driving at night.

7. Tips for Installing Last Fit Pro LED Low Beam Headlights

Installing the Last Fit Pro LED Low Beam Headlights can be challenging due to the limited space and complex headlight brackets. Here are some tips to make the installation process smoother:

• Use a ratchet with a 10-millimeter socket and an eight-millimeter socket for easier removal of bolts.
• Consider using a small flathead screwdriver or a pick for loosening and adjusting certain components.
• Be careful not to damage any wires, hoses, or connectors during the installation process.
• Take your time and be patient. The installation may require some effort, but the results will be worth it.

With these tips in mind, you can successfully install the Last Fit Pro LED Low Beam Headlights and enjoy enhanced visibility and aesthetics on your Jeep Grand Cherokee.

Highlights:

• Last Fit Pro LED Low Beam Headlights provide a brighter and more efficient lighting experience.
• The installation can be done through the wheel liner or the engine bay.
• Specifications include high-power LED chips, 10,000 lumens per set, and a color temperature of 6000K.
• Test the functionality of the bulbs and dust caps before installation.
• Compare the Last Fit Pro LED Low Beam Headlights with the stock headlights for a noticeable difference in brightness and visibility.
• Follow the provided tips to ensure a smooth and successful installation process.

FAQs:

Q: Are the Last Fit Pro LED Low Beam Headlights compatible with all Jeep Grand Cherokees? A: The Last Fit Pro LED Low Beam Headlights are designed to fit 2017 to 2021 Jeep Grand Cherokees with factory-installed projectors and dim halogen bulbs.

Q: Do the Last Fit Pro LED Low Beam Headlights require any modifications or additional wiring? A: No, these headlights are designed to be plug-and-play, and no modifications or additional wiring is required.