從高背增高器換回安全帶模式的 Britax Evolva!

Table of Contents

1. Introduction
2. Converting the Britax Evolved Carseat
3. Step 1: Adjust the Headrest
4. Step 2: Reattach the Buckle
5. Step 3: Install the Harness Pads
6. Step 4: Thread the Harness Straps
7. Step 5: Attach the Harness
8. Conclusion
9. FAQ
10. Resources

Introduction

👋 Welcome back! In this video, we'll be discussing how to convert the Britax Evolved carseat from being an iPad booster back to being a Group One car seat. If you've been following my previous video, you'll know that I showed you how to take the harness out of this car seat. Now, I'll guide you through the process of putting it back together. So, let's get started!

Converting the Britax Evolved Carseat

To convert the Britax Evolved carseat back to a Group One car seat, we'll need to follow a few simple steps. First, make sure the headrest is in the lowest position. Then, reattach the buckle and install the harness pads. After that, thread the harness straps correctly and attach the harness securely. Let's dive into each step in detail.

Step 1: Adjust the Headrest

💺 Step 1: 調整頭枕位置
Start by ensuring that the headrest is in the lowest position. If you've been using the carseat as a high-backed booster, adjust the headrest accordingly. This step is crucial for the proper installation of the harness.

Step 2: Reattach the Buckle

💺 Step 2: 安裝扣環
Personally, I find it easier to reattach the buckle before working on the harness. The buckle helps ensure that the harness doesn't twist while being put back into the seat. Take the metal yoke and insert it into the buckle hole, aligning it with the fabric. Make sure the buckle is securely in place.

Step 3: Install the Harness Pads

💺 Step 3: 安裝嬰兒安全帶墊
If you had removed the harness pads, now is the time to reinstall them. Place the pads in front of the seat and make sure they are properly positioned. This will help provide additional comfort and support for your child.

Step 4: Thread the Harness Straps

💺 Step 4: 通過安全帶背繞掛鈎 Now, let's focus on threading the harness straps correctly. Locate the buckles, which are typically found at the bottom of the seat. Pull them forward and connect them together. Ensure that the two hip straps are straight and untwisted. This is important for the correct functioning of the harness.

Step 5: Attach the Harness

💺 Step 5: 安裝安全帶
With the buckle securely attached, it's time to attach the harness. Lift the harness strap number one and ensure there are no twists. Insert it through the designated hole, taking care to align it with the headrest. Remember, the headrest should be in the lowest position for easy threading.

💺 Pro Tip: It's best to have a clear view through the holes when threading the harness. If you're having trouble, double-check the headrest position.

Continue by repeating the same process for harness strap number two. Make sure both straps are straight and untwisted. Attach the bottom harness pad to the designated hook. This pad provides additional support and comfort for your child.

Conclusion

🎉 Congratulations! You have successfully converted the Britax Evolved carseat back to a Group One car seat. By following the steps mentioned above, you can ensure the safety and comfort of your child during car rides. Remember, correct installation is crucial for optimal performance. If you found this video helpful, don't forget to hit the subscribe button for more exciting content!

FAQ

❓Q: Can I lower the harness for a smaller child?
A: Yes, you can lower the harness by adjusting the headrest position. This allows for a better fit for smaller children.

❓Q: How do I adjust the headrest?
A: To adjust the headrest, simply lift the headrest and move it to the desired position. Make sure it clicks securely into place.

❓Q: Can I remove the plastic cap on the harness strap?
A: Yes, you can remove the plastic cap if needed. However, ensure that the strap is threaded correctly through the back of the cap before removing it.

❓Q: What should I do if there are twists in the harness straps?
A: It's important to ensure that the harness straps are straight and free of twists. Twists can affect the performance and safety of the harness. Take your time to untwist them before securing the harness.

Resources

• Video Tutorial: Converting the Britax Evolved Carseat